-
Rotor pump routine maintenance method.
May 27, 2019
The rotor pump is also called colloid pump, lobe pump or universal transfer pump, etc., and the rotor pump belongs to volumetric pump. For any mechanical equipment, whether the daily maintenance work has been done well? It is not only reflected in the normal production, but more importantly, it directly affects the service life of the mechanical equipment. Rotor pump routine maintenance method. 1....
View More
-
Bonve pump's motor: single or three phase?
Jun 09, 2019
For Bonve Stainless steel rotary lobe pumps or Industrial Homogenizers, single phase or three phase motor used? Let's see what is single-phase and three-phase firstly? A single-phase motor is connected to a zero wire of a live wire, and a three-phase motor is connected to three live wires (the fire wire is the phase wire, commonly known as the fire wire). The common single-phase motor is rated at ...
View More
-
How to use pressure safety valve for lobe pumps?
Jun 15, 2019
Lobe pumps are positive displacement pumps, they must be protected from excess pressure when operating. Bonve all the sanitary and chemical grade lobe pumps can be fitted with a stainless steel pressure safety valve or a safety valve by-pass. The pressure safety valve protects the system from pressure peaks or restrictions in the discharge, providing a pressure safety valve loop from discharge to ...
View More
-
Why spend time on the calibration center for pump?
Jun 29, 2019
At the scene, the problem with many pumps was that there was no calibration center, so the problem with the failure was not the pump itself. As the alarm frequency rises, it is known to some end users who think that the pump and the drive device are well aligned, and that they do not need to be calibrated before starting up. These users generally plug in the power directly and drive. Later, when t...
View More
-
How to install Bonve rotary lobe pump?
Jul 13, 2019
Bonve rotary lobe pumps are engineered to perfection with innovative design and stringent quality control to give you trouble free service. To ensure satisfactory performance of pump, it is important that the pump must be properly selected, installed and maintained. Proper selection of appropriate model is most important for best performance, equally important is proper installation. Neglect of fo...
View More
-
How to operate Bonve rotary lobe pump correctly?
Aug 16, 2019
Bonve Positive Displacement Lobe Pumps are engineered to perfection with innovative design and stringent quality control to give you trouble free service. To ensure the normal operation of the pump, it is necessary to do the inspection before starting, and the problems that need to be paid attention to during the operation. Please see the details as below. A. Start 1. Before leaving the factory, t...
View More
Business WeChat
