Lobe pumps manufacturer
Homogenizer mixers for Food
Home /

Homogenizer mixers for Food

/Homogenizer Mixer for Tomato Ketchup

Homogenizer Mixer for Tomato Ketchup

Bonve offers its Homogenizer mixer for tomato sauce and ketchup Solutions. It is an efficient type machine with mixing, dispersion, breaking, dissolution, refinery, homogenization and emulsifying. An ideal machine to be instead of colloid mill, ball mill and high pressure homogenizer. The machine can greatly simplify the traditional productions and upgrade the production efficiency and product quality.
Inquiry Now
Products Details

EMULSIFYING AND HOMOGENIZING SHEAR PUMP



Product introduction


Bonve emulsifying and homogenizing shear pump is an efficient type machine with mixing, dispersion, breaking, dissolution, refinery, homogenization, emulsifying and pumping. The machine can greatly simplify the traditional productions and upgrade the production efficiency and product quality.

It is widely used in petrochemical, refinery chemistry, consumer chemicals, biology pharmaceutics, foods processing, paper-making, environmental protection, pain and so on.


Application for tomato ketchup

Tomato ketchup is a dipping sauce made by mixing concentrated tomato paste with water, sugar, vinegar, salt and other seasonings. Which requires the homogenizer is capable of dispersing powdered ingredients into water to form an agglomerate-free product and dispersing the tomato paste. Where a Bonve homogenizer is used, not only the high shear mixing action will improve pre-mix quality and consistency, but also a homogenous mixture is rapidly obtained.



Working Principle


The main parts are stators and rotors. At centrifugal and fluid forces created by high running of the rotors, the stators exercise on the materials with strong power shearing, centrifugal pressing, breaking, fluid friction, turbulent. The processed materials (solid, fluid and gas phase) are quickly refined, homogenized, dis-aggregated and emulsified. The repeat of this process can result in stable and high-quality products.




Product line: FHM1 and FHM3 series


Bonve emulsifying and homogenizing shear pumps are mainly devided into 2 series based on different numbers of rotor and stator, working types. (The pump with 2-stage rotor and stage can be made too)


FHM1 series with single stage rotor and stator

FHM1 series is equipped with one set multi-layer stator and rotor. Required to be used in the cyclic processing of medium and small batch production. For short distance transmission, homogeneous and emulsion.


FHM3 series with three stage rotors and stators

FHM3 series is an extension of the FHM1 series. The working chamber is composed of three-stage rotor and stator. For applications that require greater and quicker homogenizing and emulsifying, FHM3 is used. It can be used in the cyclic processing of medium and large-scale production.



Main technical parameters: FHM1


Model

Electrical Power

(kW)

Rotation Speed

(r/min)

Capacity

(m3/h)

Discharge pressure

(Mpa)

Diameter of inlet/outlet

FHM1/165

7.5/11

2900

0-10

0.15

DN50/40

FHM1/185

11/15

2900

0-15

0.15

DN65/50

FHM1/200

15/18.5

2900

0-20

0.15

DN80/65

FHM1/220

22/30

2900

0-30

0.15

DN80/65

FHM1/240

30/37

2900

0-50

0.20

DN100/80

FHM1/260

37/45

2900

0-60

0.20

DN125/100

FHM1/300

45/75

2900

0-80

0.25

DN125/100


Remarks:

1. Above dates are tested by water. For product with poor liquidity or require a higher discharge pressure, Bonve lobe pump is advised to be installed before the homogenizer for transferring.

2. Port size can be changed as needed. Flange connection as starndard, clamp and thread as optional.

3. Motor matched is normal type with 3ph/380V/50Hz as standard.

4. MOC: SS316 as standard, SS304, 316L and others as optional.  150°C (302°F) anti-heat seal.

5. Bonve reserves the right to change specifications without prior notification.



Main technical parameters: FHM3


Model

Electrical Power

(Kw)

Rotation Speed

(r/min)

Flow rate

(m3/h)

Discharge pressure

(Mpa)

Diameter of inlet/outlet

FHM3/165

18.5

2900

0-10

0.30

DN50/40

FHM3/185

30

2900

0-20

0.30

DN65/50

FHM3/200

45

2900

0-30

0.30

DN80/65

FHM3/220

55

2900

0-40

0.30

DN80/65

FHM3/240

90

2900

0-60

0.30

DN100/80

FHM3/260

132

2900

0-100

0.30

DN125/100

FHM3/300

160

1400

0-120

0.30

DN150/125


Remarks:

1. Above dates are tested by water. For product with poor liquidity or require a higher discharge pressure, Bonve lobe pump is advised to be installed before the homogenizer for transferring.

2. Port size can be changed as needed. Flange connection as starndard, clamp and thread as optional.

3. Motor matched is Siemens, ABB or equivalent brand. Normal type with 3ph/380V/50Hz as standard.

4. MOC: SS316 as standard, SS304, 316L and others as optional.  150°C (302°F) anti-heat seal.

5. Bonve reserves the right to change specifications without prior notification.



Applications




Working process


For various processes, different equipment is used to match and optimize the combination, so that the system

achieves the best working effect. The common process flow diagram is as follows:




Selection Guideline


Your industry/application

 

 Processed medium’s name

 

 Medium’s feature

 Sanitary (     ) Corrosive (     ) Poisonous (     )

 Medium’s proportion

 Liquid % ____   Density____  Viscosity____ PH value____  

 Solid %  ____   Solid size ___

 Processing requirement

 Mixing dissolving    (     )          Dispersed suspension         (     )

 Emulsification          (     )          Homogeneity                      (     )

 Reaction                    (     )          Powder liquid mixing         (     )

 Working type

 Continuous circulation work (     )    Continuous non-circulation work (     ) 

 Batch type                              (     )

 Working temperature

 

 Particle size

 Before processing _______

 After processing  ________

 Handling capacity required

 

 Delivery head/pressure required

 

 Vessel’s dimension

 

 Existing pipe size and connection type

 

 The existing process equipment and the existing problems



About us


BONVE is a Chinese leading manufacturer in ROTARY LOBE PUMPS and HOMOGENIZER PUMPS.Providing its customers with customized pumping and mixing solutions and solving their problems during the production.

Bonve pumps and mixers are widely used in food, dairy, beverages, chemical, pulp&paper, soaps & detergents, pharmaceuticals, pesticide, coatings etc. By 2020, Bonve served 4000+ customers in various industries and 50000+ pumps running in the worldwide.

Time and again companies specify Bonve Pumps as the "standard" equipment for their manufacturing processes. We are looking forward to be partner with you.



Contact us


We welcome you to contact us for a pump solution if have any demand.  

Contact person: Ms. Kepner

Tel: +86-574-87769810 Fax: +86-574-62962898

Mobile/Whatsapp/Wechat: +86 15869300458

Email: bvsales1@bonvepumps.com

Get Free Inquiry Now

We will contact you as soon as possible!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

HUATAI BONVE PUMPS CO.,LTD

When you choose a Bonve pump, you not only get the pump, but you also get the advantage of Bonve's engineering expertise and years of application knowledge in your industry.

Copyright © 2024 HUATAI BONVE PUMPS CO.,LTD. All Rights Reserved.

Home

Products

About us

Contact us