FHC MULTI-PORTS HOMOGENIZER MIXING PUMPS
FHC series are upgraed from FHM3 series, which consists of multi-pipe compound chambers and mixing chamber. The mixing chamber can be single-stage, two-stage or three-stage. Each chamber comprises 2-5 layers of stators and rotors. The gear clearance of each layer stator and rotor is from wide to slender, suck different raw material to compound and homogenize instantaneously according to rate requirement.
FHC series are widely used in neutralization admixture of multi-material need to compound homogeneous and chemical industry process technics. The mixer can greatly simplify the traditional production processes, upgrade the production efficiency and improve the product quality.
Features:
100% dispersive shear;
Quickly dissolves solids without agglomeration;
No dead ends, high evenness;
Time-saving, high-efficiency, low-consumption;
Simple operation, convenient maintenance, and can realize automatic control.
WORKING PRINCIPLE
The main parts are stators and rotors. At centrifugal and fluid forces created by rapid turning of the rotors, the stators exercise on the materials with strong power shearing, centrifugal pressing, breaking, fluid friction, turbulent. The processed materials (solid, fluid and gas phase) are quickly refined, homogenized, dis-aggregated and emulsified. The repeat of this process can result in stable and high-quality products.
MAIN TECHNICAL PARAMETERS
Model
Capacity
Pressure
Power
RPM
m3/H
Mpa
kW
R/min
FCH10-185
1-3
0.1-1.6
2.2-4
260-1400
FCH20-185
3-6
0.1-1.6
3-5.5
260-1400
FCH10-200
5-10
0.1-1.6
3-7.5
260-1400
FCH20-200
10-15
0.1-1.6
4-11
260-1400
FCH15-260
15-20
0.1-1.6
5.5-15
260-1400
FCH25-260
20-30
0.1-1.6
7.5-18.5
260-1400
FCH15-300
40-50
0.1-1.6
11-30
260-1400
FCH30-300
50-80
0.1-1.6
15-45
260-1400
FCH15-360
80-120
0.1-1.6
22-55
260-1400
FCH30-360
120-160
0.1-1.6
30-75
260-1400
FCH15-400
160-220
0.1-1.6
55-90
260-1400
FCH30-400
220-250
0.1-1.6
75-110
260-1400
FCH15-460
260-320
0.1-1.6
90-132
260-1400
FCH30-460
320-350
0.1-1.6
110-160
260-1400
Remarks:
1. Abovedates are tested by water. For product with poor liquidity or require a higher discharge pressure, Bonve lobe pump is advised to be installed before the homogenizer for transferring.
2. Port size can be changed as needed. Flange connection as starndard, clamp and thread as optional.
3. Motor matched is Siemens, ABB or equivalent brand. Normal type with 3ph/380V/50Hz as standard.
4. MOC: SS316 as standard, SS304, 316L and others as optional. 150°C (302°F) anti-heat seal.
5. Bonve reserves the right to change specifications without prior notification.
APPLICATIONS
Refined chemistry: Pigment, dyestuff, plastic auxiliaries, textile auxiliaries, adhesives, resin emulsion, hot melt adhesive, sealing compound, glue, pulp, finishing agent, surface active agent, carbon black disperse, adhesive-proof agent, mold release agent, defoaming agent, fluorine cleaning agent, polishing agent, leather auxiliaries, pigment paste, wax emulsion, bactericide, coagulant, etc.
Petrochemistry: Lubricant, heavy oil emulsion, diesel oil emulsion, modified asphalt, catalyzer, wax emulsion etc.
Biology & Pharmaceuticals: Injection, antibiotic, medical emulsion, medical paste, health products, mini-capsule emulsion, cell breaker, etc.
Paint & ink: Printing ink, paint, emulsion paint, building coating, nanometer coating, photocureable coating, coating auxiliaries, carbon black disperse, print ink, glaze, bentonite, etc.
Farm chemicals: Pesticide, herbicide, medicinal butter, fertilizer, pesticide adjuvant, etc.
Nanometer materials: Disperse and dis-aggregation for nanometer medium, etc.
Food stuff industry: Juice, jam, ice-cream, milk products, food addictive, tea drink, chocolate, bean milk, essence, milk, etc.
Consumer chemistry: Fluid detergent, skim cream, lip paste, face foam, silicon lio emulsion, household essence, skin care, cosmetics, etc.
Paper making: Pulp, filling, fry strength agent, wet strength agent, sizing agent, filtering agent, anti-foaming agent spreading, water treatment chemicals, etc.
WORKING PROCESS
For various processes, different equipment is used to match and optimize the combination, so that the system achieves the best working effect. The common process flow diagram is as follows:
① High shear mixer working with powder liquid homogenizing mixer. For high viscous products, Bonve lobe pump is necessary to work together
② Bottom type high shear mixer working with FHM3 homogenizing mixer
③ Low speed agitator working with FHM1 homogenizing mixer
④ Multi-pipe FHC homogenizing mixer continuous production process
SELECTION GUIDELINE
|
Your industry/application |
|
|
Processed medium’s name |
|
|
Medium’s feature |
Sanitary ( ) Corrosive ( ) Poisonous ( ) |
|
Medium’s proportion |
Liquid % ____ Density____ Viscosity____ PH value____ Solid % ____ Solid size ___ |
|
Processing requirement |
Mixing dissolving ( ) Dispersed suspension ( ) Emulsification ( ) Homogeneity ( ) Reaction ( ) Powder liquid mixing ( ) |
|
Working type |
Continuous circulation work ( ) Batch type ( ) |
|
Working temperature |
|
|
Particle size |
Before processing ____ After processing _____ |
|
Handling capacity required |
|
|
Delivery head/pressure required |
|
|
Vessel's dimension |
|
|
Existing pipe size and connection type |
|
|
The existing process equipment and the existing problems |
|
For a quick quotation, please email cathy@bonvepumps.com to ask about selection guideline. Your inuqiry will be welcome and get our prompt reply. Thanks for your interest and love for Bonve FHC Multi-port Homogenizer Mixing Pumps.
